Before You Start
For the most accurate comparison, choose a similar garment you already own that fits you well. Lay it flat on a firm surface and follow the guides below using a flexible measuring tape.
All measurements are shown in centimetres (cm).
Choose a Similar Garment
Choose a garment from your wardrobe that is the same type and has a similar shape to the piece you are considering. It should fit you comfortably and reflect how you would like the new garment to fit. Avoid comparing garments with very different cuts, fabrics or levels of stretch.
Prepare the garment
Fasten all buttons and zips and make sure the pockets are empty. Lay the garment on a flat, firm surface, with the seams aligned and the fabric resting naturally. Gently smooth out any wrinkles, but do not pull or force the garment into shape.
Measure Without Stretching
Use a flexible metric measuring tape and position it directly on the fabric as shown in each guide. Keep the tape flat and straight, measuring between the indicated points without pulling the tape tight or stretching the garment. Record each result exactly as measured.
Compare Your Measurements
Once you have measured a garment that fits you well, compare each result with the measurements shown on the relevant product page. Match the same measurement names and choose the size with the closest values in centimetres, while considering whether you prefer a closer or more relaxed fit.
Always compare garment measurements with garment measurements, not body measurements or the size printed on a label.
Measuring and Fit Questions, Answered
Should I measure my body or a garment?
Measure a garment that already fits you well. The measurements listed on our product pages refer to the garment itself, so body measurements should not be compared directly with them.
Which garment should I use as a reference?
Choose the same type of garment with a similar cut, fabric and level of stretch. Your reference garment should fit comfortably and reflect how you would like the new garment to fit.
Should I measure more than once?
Yes. Measure each area twice to confirm the result. If the measurements are different, reposition the garment and tape, then measure again before recording the most consistent value.
Should I measure in centimetres?
Yes. All measurements throughout our website are shown in centimetres. We recommend using the metric side of your measuring tape to avoid errors caused by converting between units.
Should I double a measurement taken with the garment laid flat?
No. Record the measurement exactly as taken from edge to edge. Only double it if the product page specifically describes that measurement as a circumference.
How should I position the measuring tape?
Place the tape directly on the fabric and keep it flat, straight and aligned with the area being measured. It should rest naturally on the garment without any slack and without pulling or stretching the fabric.
How do I compare my measurements with a product page?
Match each measurement with the corresponding name on the product page. Compare the values in centimetres and choose the size whose overall measurements are closest to your reference garment.
What if my measurements fall between two sizes?
Consider how you would like the garment to fit. The smaller size will generally provide a closer fit, while the larger size will provide more room. Always take the product’s intended fit and fabric into account.
What if different measurements correspond to different sizes?
Prioritise the areas that have the greatest effect on your comfort and make sure the chosen size provides enough room where you need it most. Consider the garment’s intended shape rather than selecting a size based on only one measurement.
How should I measure a garment made from stretch fabric?
Allow the garment to rest naturally on the surface and measure it without stretching the fabric. For the most useful comparison, use a reference garment with a similar fabric and level of stretch.
Can product measurements vary slightly?
Yes. Small variations may occur because of the fabric, finishing process and manual measuring. These variations are normal and should not significantly affect the overall fit of the garment.